Marine & Industrial Engineering Services in Dubai, UAE
Anchor Marine Engineering provides marine and industrial engineering services for the shipping, oil and gas and manufacturing industries. From our workshop at Al Jadaf Dry Dock we rewind motors, repair ships, manufacture heating elements and control panels, and machine and fabricate to your specification.
Find the right service for your requirement
Start from the problem. Each route below leads to the service page with the process and technical detail.
A vessel needs attention
Repairs, overhauls or scheduled maintenance
Hull, engine, generator, pump or electrical faults on commercial and private vessels, in dry dock or on-site.
Rotating equipment has failed
A motor, rotor, pump or shaft is out of service
Burnt windings, excessive vibration, worn shafts or a pump that no longer delivers its flow.
Something must be built
Equipment manufactured to your specification
Heating elements, calorifiers, control panels, pressure vessels, tanks, steel structures or piping.
01 · Vessels
Marine Engineering
Repair and maintenance for commercial and private vessels, at our Dubai shipyard or on-site across the UAE.
Marine
Ship Repair & Maintenance
Ship repair and maintenance that keeps vessels running efficiently and compliant with safety regulations. The work covers ship electrical wiring, motor repairs, hull cleaning and general maintenance, from dockside repairs to scheduled dry dock work.
- Hull & structural repairs
- Marine engine overhauling
- Generator overhauling
- Marine pump overhauling
- Ship electrical wiring
- Preventive maintenance programs
02 · Marine & industrial
Electrical Engineering & Control
Rewinding and balancing of rotating electrical machines, and in-house manufacture of switchgear and control panels.
Marine & industrial
Motor Rewinding & Rotor Balancing
AC and DC motor rewinding for equipment up to 900KW, so machinery returns to efficient operation. Dynamic balancing reduces vibration and extends the life of rotating components. We also carry out diagnostics, including vibration analysis and insulation resistance testing, for industrial motors and generators.
- AC & DC motors up to 900KW
- Rotor balancing up to 2.5 tons
- Vibration analysis
- Insulation resistance testing
Rewinds use Class H insulation for UAE heat and humidity.
Marine & industrial
Switchgear & Control Panel Manufacturing
Custom electrical switchgear and control panels for temperature regulation and energy management, built for reliability and safety in marine and industrial processes. Panels range from main distribution boards for power stations to temperature control panels for marine HVAC systems.
- Custom electrical panel design
- Switchgear assembly & fabrication
- Temperature control panels
- Testing & commissioning
Built in-house with IP65-rated enclosures.
03 · Marine & industrial
Heating & Thermal Equipment
Heating elements and hot water calorifiers manufactured at our Al Jadaf facility to your specification.
Marine & industrial
Heating Element Manufacturing
Energy-efficient heating elements for industrial and marine applications. Tubular heaters, band heaters and other custom elements are built to your exact voltage, wattage and material specification, for high heat output with minimal energy consumption.
- Tubular & band heaters
- Immersion & cartridge heaters
- Hot water calorifiers
- Single units to bulk supply
Hot water calorifiers from 300 to 5000 litres, in stainless steel or copper.
04 · Marine & industrial
Mechanical, Fabrication & Piping
Precision machining, pump overhauling, metal fabrication and piping installation for vessels, plants and facilities.
Marine & industrial
Mechanical & Machine Shop Services
Our mechanical and machine shop provides precision machining, including lathe work, balancing and custom fabrication. The shop also overhauls centrifugal, submersible, hydraulic and marine pumps. From minor repairs to large-scale industrial machining, the work is handled in our Dubai workshop.
- Precision lathe machining
- Gear cutting & shaft repair
- Dynamic balancing
- Pump overhauling & repair
Marine & industrial
Fabrication Services
Stainless steel pressure vessels, tanks and steel structures, plus fabrication and installation of piping systems including fuel, firewater, lube oil and chemical lines. From chilled water piping to steam heating coils, our team manages every stage of fabrication and installation.
- Pressure vessels, tanks & ducts
- Steel structure fabrication
- Industrial gas piping
- Conveyor systems installation
Specific work
Need help with one piece of equipment?
These jobs sit inside the services above. Each link goes to the page where the work is described.
- Pump overhauling & repairCentrifugal, submersible, hydraulic and marine pumps: workshop assembly, testing and on-site visits.Pump overhauling in Dubai →
- Dynamic balancingRotors, shafts and impellers balanced to eliminate excessive vibration.Rotor balancing →
- Hot water calorifiersCustom-built in stainless steel or copper, 300 to 5000 litres.Calorifier manufacturing →
- Temperature control panelsProgrammable units with thermostats, digital displays and logic controllers for HVAC and engine systems.Temperature control panels →
- Gear cutting & shaft repairGear manufacturing and precision shaft repair for industrial and marine machinery.Gear cutting & shaft repair →
- Steam heating coilsFabrication and installation of steam heating coils for oil tanks.Steam heating coil fabrication →
- Industrial gas pipingCarbon steel and UPVC piping for oxygen, argon, natural gas and nitrogen, low and high pressure.Industrial gas piping →
- Ship electrical wiringElectrical wiring and repairs on board commercial and private vessels.Ship electrical services →
Workshop & on-site
At Al Jadaf Dry Dock or at your vessel
Ship repair is carried out at our Dubai shipyard or on-site at your location. For pump repairs our Dubai-based team can visit on-site, while motor rewinding, balancing and machining are completed in the workshop.
Why Choose Anchor Marine Engineering?
Experienced engineers in Dubai
Decades of mechanical and marine engineering experience, working from Al Jadaf Dry Dock since 1995.
Solutions for UAE industries
We work with clients on shipbuilding, ship repair, manufacturing and industrial repair requirements.
Commitment to quality and safety
Safety and reliability are built into how every project is planned and carried out.
Cost-effective engineering
Durable, high-performance results with fair and transparent pricing.
One job can involve more than one service
A vessel repair may need a propulsion motor rewound, a pump overhauled and new electrical wiring. A plant shutdown may combine piping, a steel structure and a control panel. Because these disciplines work from the same workshop, the work is planned together.
Our executed projects include work for power stations, steel plants, feed mills, hotels and vessels.
Which services are for marine vessels and which are for industrial equipment?
Ship repair and maintenance is dedicated to marine vessels. Motor rewinding, rotor balancing, switchgear and control panels, heating elements, the machine shop and fabrication serve both marine and industrial clients, including shipping, oil and gas, power plants and manufacturing.
What is the largest motor you can rewind?
We rewind AC and DC motors up to 900KW and dynamically balance rotors up to 2.5 tons at our Al Jadaf Dry Dock workshop.
Do you work on-site or only in the workshop?
Both. Ship repair can be carried out at our Dubai shipyard or on-site, and our team offers on-site visits for pump repairs. Full motor rewinding is done in the workshop.
Can you manufacture heating elements and panels to our specification?
Yes. Heating elements are made to your voltage, wattage and material requirements, and switchgear and temperature control panels are designed and built in-house for your application.
How do I request a quotation?
Call +971 56 278 5002, email info@anchormarineeng.ae or use the contact form. Include drawings, nameplate data or specifications where available so we can quote accurately.
Get a quote
Send us your requirement
Ship maintenance, motor rewinding, custom fabrication, heating element manufacturing or machining: share drawings, nameplate data or specifications and our team will prepare a free quote.
Shed DY-03, Al Jadaf Dry Dock, Dubai · 7:30am – 5:00pm